4000 Router Series Layer 3 - IP Routing Command Reference

295

Field Description

Local Local router ID.

Type

BGP connection type between the local router and the peer:

• IBGP link—IBGP connection.

• EBGP link—EBGP connection.

remote router ID Router ID of the peer.

BGP current state Current state of the BGP session between the local router and the peer.

Up for Lasting time of the BGP session.

BGP current event Current event of the BGP session between the local router and the peer.

BGP last state Previous state of the BGP session.

Port TCP port numbers of the local router and its peer.

Configured

Timer configured on the local router in seconds, including the holdtime

(Active Hold Time) and keepalive interval (Keepalive Time).

Received

Received timer (configured on the peer) in seconds, including the

holdtime (Active Hold Time).

Negotiated

Negotiated timer in seconds, including the holdtime (Active Hold Time)

and keepalive interval (Keepalive Time).

Peer optional capabilities Optional capabilities supported by the peer.

Peer support BGP route AS4

capability

The peer supports 4-byte AS number.

Address family IPv6 Unicast

IPv6 unicast address family capability: Routes of the address family can

be advertised and received.

Received Total numbers of received messages and updates.

Sent Total numbers of sent messages and updates.

Maximum allowed prefix number Maximum number of routes allowed to learn from the peer.

Threshold

Percentage of received routes from the peer to maximum routes allowed

to learn from the peer. If the percentage is reached, the system

generates alarm messages.

Minimum time between