HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

296
Date Time State Notification
Error/SubError
22-Nov-2011 09:31:12 Up
Table 81 Command output
Field Description
Peer IP address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—The BGP session is in Established state.
• Down—The BGP session is down.
Notification
Error/SubError
Error code of the Notification, indicating the cause of why the BGP session is down.
• Error—Refers to the error code, which identifies the type of the Notification.
• SubError—Refers to the error subcode of the Notification, which identifies the
specified information about the reported error.
display bgp routing-table dampened ipv4 unicast
Use display bgp routing-table dampened ipv4 unicast to display dampened BGP IPv4 unicast routes.
Syntax
display bgp routing-table dampened ipv4 [ unicast ] [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays dampened BGP IPv4 unicast
routes for the public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display dampened BGP IPv4 unicast routes.
<Sysname> display bgp routing-table dampened ipv4
Total number of routes: 1