HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

306
Field Descri
p
tion
Origin
Origin of the route:
• igp—Originated in the AS. The origin of summary routes and routes
advertised with the network command is IGP.
• egp—Learned through EGP.
• incomplete—Unknown origin. The origin of routes redistributed from
IGP protocols is INCOMPLETE.
Attribute value
BGP path attributes:
• MED—MED value.
• localpref—Local preference value.
• pref-val—Preferred value.
• pre—Route preference.
State
Current state of the route:
• valid.
• internal.
• external.
• local.
• synchronize.
• best.
From IP address of BGP peer that advertised the route.
Relay Nexthop
Next hop found by route recursion. If no next hop is found, this field
displays not resolved.
display bgp routing-table ipv4 unicast advertise-info
Use display bgp routing-table ipv4 unicast advertise-info to display advertisement information for BGP
IPv4 unicast routes.
Syntax
display bgp routing-table ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] network-address [ mask |
mask-length ] advertise-info
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays advertisement information
of BGP IPv4 unicast routes for the public network.
network-address: Specifies a destination network address.
mask: Specifies a network mask, in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.