HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

324
display bgp update-group ipv6 unicast
Use display bgp update-group ipv6 unicast to display information about BGP update groups for the BGP
IPv6 unicast address family.
Syntax
display bgp update-group ipv6 [ unicast ] [ ip-address | ipv6-address ]
display bgp update-group ipv6 [ unicast ] vpn-instance vpn-instance-name [ ipv6-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip-address: Displays BGP IPv6 unicast address family update group information for the specified BGP
peer.
ipv6-address: Displays BGP IPv6 unicast address family update group information for the specified IPv6
BGP peer.
vpn-instance vpn-instance-name: Displays BGP IPv6 unicast address family update group information for
the MPLS L3VPN instance specified by its name, a case-sensitive string of 1 to 31 characters. If no VPN
instance is specified, the command displays BGP IPv6 unicast address family update group information
for the public network.
Usage guidelines
If no parameters are specified, this command displays all BGP IPv6 unicast address family update group
information for the public network.
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display information about all BGP IPv6 unicast address family update groups for the public network.
<Sysname> display bgp update-group ipv6
Update-group ID: 0
Type: EBGP link
4-byte AS number: Supported
Minimum time between advertisements: 30 seconds
OutQ: 0
Members: 1
99::1
# Display update group information for the BGP IPv6 unicast peer 1::2 in the public network.
<Sysname> display bgp update-group ipv6 1::2
Update-group ID: 0
Type: EBGP link
4-byte AS number: Supported