HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

339
Parameters
ip-address: Specifies an IPv4 network address. If the mask or mask-length is not specified, natural mask
is used.
mask: Specifies a mask in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.
ipv6-address: Specifies an IPv6 network address.
prefix-length: Specifies a prefix length in the range of 0 to 128.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters, to filter routes or set the route attributes.
Usage guidelines
• The network to be injected must be available and active in the local IP routing table.
• The ORIGIN attribute of the route injected with the network command is IGP.
• When you execute the undo network command, you must specify the same mask or mask
length/prefix length that you specified for the network command. Otherwise, the configuration
cannot be removed.
Examples
# In BGP IPv4 unicast address family view, inject local network 10.0.0.0/16 to the BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv4 unicast
[Sysname-bgp-ipv4] network 10.0.0.0 255.255.0.0
# In BGP-VPN IPv4 unicast address family view, inject local network 10.0.0.0/16 to the BGP routing
table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv4 unicast
[Sysname-bgp-ipv4-vpn1] network 10.0.0.0 255.255.0.0
# In BGP IPv6 unicast address family view, inject local network 2002::/64 to the IPv6 BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv6 unicast
[Sysname-bgp-ipv6] network 2002:: 64
# In BGP-VPN IPv6 unicast address family view, inject local network 2002::/64 to the IPv6 BGP routing
table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] network 2002:: 64