HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

23
Destination: 1:1::/64
Protocol: Static Process ID: 0
SubProtID: 0x2 Age: 08h57m19s
Cost: 0 Preference: 60
Tag: 0 State: Active Adv
OrigTblID: 0x0 OrigVrf: default-vrf
TableID: 0xa OrigAs: 0
NBRID: 0x20000002 LastAs: 0
AttrID: 0xffffffff Neighbor: ::
Flags: 0x10084 OrigNextHop: ::
Label: NULL RealNextHop: ::
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: NULL0
BkTunnel ID: Invalid BkInterface: N/A
For command output, see Table 7.
display ipv6 routing-table ipv6-address
Use display ipv6 routing-table ipv6-address to display information about routes to an IPv6 destination
address.
Use display ipv6 routing-table ipv6-address1 to ipv6-address2 to display information about routes to a
range of IPv6 destination addresses.
Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-address [ prefix-length ]
[ longer-match ] [ verbose ]
display ipv6 routing-table [ vpn-instance vpn-instance-name ] ipv6-address1 to ipv6-address2
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
ipv6-address: Specifies a destination IPv6 address.
prefix-length: Specifies the prefix length in the range of 0 to 128.
longer-match: Displays the route entry with the longest prefix.
ipv6-address1 to ipv6-address2: Specifies a destination IPv6 address range.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. Without this keyword, the command displays only brief information about active routes.