4000 Router Series Layer 3 - IP Routing Command Reference

Usage guidelines

Executing the command with different parameters yields different output:

• display ipv6 routing-table ipv6-address:

{ The system ANDs the entered destination IPv6 address with the prefix length in each active route

entry.

{ The system ANDs the destination IPv6 address in each active route entry with the prefix length

in the entry.

If the two operations yield the same result for an entry, this entry is displayed.

• display ipv6 routing-table ipv6-address prefix-length:

{ The system ANDs the entered destination IPv6 address with the entered prefix length.

{ The system ANDs the destination IPv6 address in each active route entry with the entered prefix

length.

If the two operations yield the same result for an entry and the entry has a prefix length less than

or equal to the entered prefix length, the entry is displayed.

• display ipv6 routing-table ipv6-address longer-match:

{ The system ANDs the entered destination IPv6 address with the prefix length in each active route

entry.

{ The system ANDs the destination IPv6 address in each active route entry with the prefix length

in the entry.

If the two operations yield the same result for multiple entries, the one that has the longest prefix

length is displayed.

• display ipv6 routing-table ipv6-address prefix-length longer-match:

{ The system ANDs the entered destination IPv6 address with the entered prefix length.

{ The system ANDs the destination IPv6 address in each active route entry with the entered prefix

length.

If the two operations yield the same result for multiple entries with a prefix length less than or equal

to the entered prefix length, the one with the longest prefix length is displayed.

• display ipv6 routing-table ipv6-address1 to ipv6-address2:

The system displays route entries with destinations in the range of ipv6-address1/128 to

ipv6-address2/128.

Examples

# Display brief information about the routes to the destination IPv6 address 10::1 127.

<Sysname> display ipv6 routing-table 10::1 127

Summary Count: 3

Destination: 10::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 10::/68 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0