HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

375
[Sysname-bgp-vpnv4] peer 1.1.1.1 preferred-value 50
# In BGP-VPN IPv6 unicast address family view, specify the preferred value as 50 for routes from peer
1: :1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] peer 1::1 preferred-value 50
Related commands
• apply preferred-value
• route-policy
peer prefix-list
Use peer prefix-list to reference a prefix list to filter routes received from or advertised to a peer or peer
group.
Use undo peer prefix-list to remove the configuration.
Syntax
In BGP IPv4 unicast address family view/BGP-VPN IPv4 unicast address family view/BGP VPNv4
address family view:
peer { group-name | ip-address } prefix-list prefix-list-name { export | import }
undo peer { group-name | ip-address } prefix-list { export | import }
In BGP IPv6 unicast address family view:
peer { group-name | ip-address | ipv6-address } prefix-list ipv6-prefix-name { export | import }
undo peer { group-name | ip-address | ipv6-address } prefix-list { export | import }
In BGP-VPN IPv6 unicast address family view:
peer { group-name | ipv6-address } prefix-list ipv6-prefix-name { export | import }
undo peer { group-name | ipv6-address } prefix-list { export | import }
In BGP VPNv6 address family view:
peer { group-name | ip-address } prefix-list ipv6-prefix-name { export | import }
undo peer { gr
oup-name | ip-address } prefix-list { export | import }
Default
No prefix list based filtering is configured.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP VPNv4 address
family view, BGP IPv6 unicast address family view, BGP-VPN IPv6 unicast address family view, BGP
VPNv6 address family view
Predefined user roles
network-admin