4000 Router Series Layer 3 - IP Routing Command Reference

<Sysname> display ipv6 routing-table protocol static

Summary Count : 3

Static Routing table Status : <Active>

Summary Count : 3

Destination: 2::2/128 Protocol : Static

NextHop : fe80::2 Preference: 60

Interface : Eth1/2 Cost : 0

Destination: 2::2/128 Protocol : Static

NextHop : fe80::3 Preference: 60

Interface : Eth1/2 Cost : 0

Destination: 3::3/128 Protocol : Static

NextHop : 2::2 Preference: 60

Interface : Eth1/2 Cost : 0

Static Routing table Status : <Inactive>

Summary Count : 0

For command output, see Table 6.

display ipv6 routing-table statistics

Use display ipv6 routing-table statistics to display IPv6 route statistics.

Syntax

display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. Without this option, the command displays route statistics for the public network.

Examples

# Display IPv6 route statistics for the public network.

<Sysname> display ipv6 routing-table statistics

Proto route active added deleted

DIRECT 5 5 5 0

STATIC 3 3 3 0

RIPng 0 0 0 0

OSPFv3 0 0 0 0