HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

401
Default
SNMP notifications for BGP are enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature enables generating SNMP notifications for BGP as defined in RFC 4273 upon neighbor state
changes. The SNMP notifications include the neighbor address, the code and subcode of the most recent
error, and the current neighbor state. The generated SNMP notifications are sent to the SNMP module.
The SNMP module determines how to output the notifications according to the configured output rules.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
Examples
# Enable SNMP notifications for BGP.
<Sysname> system-view
[Sysname] snmp-agent trap enable bgp
summary automatic
Use summary automatic to configure automatic route summarization for redistributed IGP subnet routes.
Use undo summary automatic to remove the configuration.
Syntax
summary automatic
undo summary automatic
Default
Automatic route summarization is not performed for redistributed IGP subnet routes.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view
Predefined user roles
network-admin
Usage guidelines
After the summary automatic command is configured, BGP summarizes IGP subnets redistributed by the
import-route command.
Automatic summary routes can be manually summarized, but cannot be added to the IP routing table.
Examples
# In BGP IPv4 unicast address family view, configure automatic route summarization for redistributed IGP
subnet routes.
<Sysname> system-view
[Sysname] bgp 100