HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

413
Field Description
apply next-hop Specify a next hop for permitted packets.
Related commands
policy-based-route
display ip policy-based-route interface
Use display ip policy-based-route interface to display interface PBR configuration and statistics.
Syntax
MSR2000/MSR3000:
display ip policy-based-route interface interface-type interface-number
MSR4000:
display ip policy-based-route interface interface-type interface-number [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Displays the PBR configuration and statistics on a card. The slot-number argument is the
number of the slot that holds the card.
Examples
# Display PBR configuration and statistics on Ethernet 1/1.
<Sysname> display ip policy-based-route interface ethernet 1/1
Policy based routing information for interface Ethernet1/1(failed):
Policy name: aaa
node 0 deny:
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit:
if-match acl 2000
apply next-hop 2.2.2.2
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1.1.1.1
apply output-interface Ethernet1/2 track 1 (down)
apply output-interface Ethernet1/3 track 2 (inactive)