4000 Router Series Layer 3 - IP Routing Command Reference

416

if-match acl 3101

apply next-hop 1.1.1.1

Matched: 0

Total matched: 0

Table 101 Command output

Field Description

Policy based routing information for

local

Local PBR configuration and statistics.

node 0 deny/node 2 permit Match mode of the node: permit or deny.

if-match acl Match packets against the ACL.

apply next-hop Specify a next hop for permitted packets.

Matched: 0 Number of successful matches on the node.

Total matched Total number of successful matches on all nodes.

Related commands

reset ip policy-based-route statistics

display ip policy-based-route setup

Use display ip policy-based-route setup to display PBR configuration.

Syntax

display ip policy-based-route setup

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display PBR configuration.

<Sysname> display ip policy-based-route setup

Policy Name Interface Name

pr01 Ethernet 1/1

Table 102 Command output

Field Description

Interface Name Interface where the policy is applied.

Related commands

ip policy-based-route