HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

454
display ospfv3
Use display ospfv3 to display OSPFv3 process information.
Syntax
display ospfv3 [ process-id ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If no process ID is specified,
this command displays information about all OSPFv3 processes.
verbose: Displays detailed OSPFv3 process information. Without this keyword, the command displays
brief OSPFv3 process information.
Examples
# Display detailed information about all OSPFv3 processes.
<Sysname> display ospfv3 verbose
OSPFv3 Process 1 with Router ID 1.1.1.1
RouterID: 1.1.1.1 Router type:
Multi-VPN-Instance is not enabled
SPF-schedule-interval: 5 50 200
LSA generation interval: 5
LSA arrival interval: 1000
Transmit pacing: Interval: 20 Count: 3
Route preference: 10
ASE route preference: 150
SPF calculation count: 0
External LSA count: 0
LSA originated count: 0
LSA received count: 0
Area count: 2
ExChange/Loading neighbors: 0
Max equal cost paths: 32
Up interfaces: 1
Full neighbors: 1
Normal areas with up interfaces: 1
Calculation trigger type: Full
Current calculation type: SPF calc
Current calculation phase: Calc area topo
Redistribute timer: Off
Redistribute schedule type: RIB