HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

458
Field Descri
p
tion
Next reset type
Next process reset type:
• N/A—The process is not reset.
• GR quit—Normal reset when GR quits abnormally.
• Delete—Delete OSPFv3 process.
• Undo router-id—Delete router ID.
• Set router-id—Set router ID.
Reset prepare message replied
Modules that reply reset prepare messages:
• P—Neighbor maintenance module.
• S—LSDB synchronization module.
• C—Route calculation module.
• R—Route redistribution module.
Reset process message replied
Modules that reply reset process messages:
• P—Neighbor maintenance module.
• S—LSDB synchronization module.
• C—Route calculation module.
• R—Route redistribution module.
Reset phase of module
Reset phase of each module:
• LSDB synchronization (S) module:
{ N/A—Not reset.
{ Delete ASE—Delete all ASE LSAs.
{ Delete area LSA—Delete LSAs from an area.
{ Delete area IF—Delete interfaces from an area.
• Route calculation (C) module:
{ N/A—Not reset.
{ Delete topology—Delete area topology.
{ Delete router—Delete routes of routers.
{ Delete intra AS—Delete intra-AS routes
{ Delete inter AS—Delete AS-external routes.
{ Delete ASBR—Delete ASBR routes.
• Route redistribution (R) module:
{ N/A—Not reset.
{ Delete import—Delete redistributed routes.
IPsec profile name IPsec profile applied to the interface.
Created by Vlink The area is created through virtual link.
display ospfv3 abr-asbr
Use display ospfv3 abr-asbr to display information about the routes to OSPFv3 ABR and ASBR.
Syntax
display ospfv3 [ process-id ] abr-asbr
Views
Any view