HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

460
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. Without this argument, the
command displays information about ABR summary routes for all OSPFv3 processes.
area area-id: Specifies an OSPFv3 area by its ID, which is an IP address or a decimal integer in the
range of 0 to 4294967295 that is translated into the IP address format. Without this option, the
command displays information about ABR summary routes for all OSPFv3 areas.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix.
The prefix-length argument specifies a prefix length in the range of 0 to 128. Without these arguments,
the command displays information about all summary routes on the ABR.
verbose: Displays detailed ABR summary route information. Without this keyword, the command
displays brief ABR summary route information.
Examples
# Display brief ABR summary route information in OSPFv3 process 1.
<Sysname> display ospfv3 1 abr-summary
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 1.1.1.1
Total summary addresses: 1
Prefix : 1000:4::/32
Status : Advertise
NULL0 : Active
Cost : 1 (Configured)
Routes count: 2
Table 113 Command output
Field Descri
p
tion
Total summary addresses Total number of summary routes.
Area Area to which the summary routes belong.
Prefix Prefix of the summary route.
Status Advertisement status of the summary route.
NULL0 Null 0 route.
Cost Cost to the summary network.
Routes count Number of summarized routes.
# Display detailed ABR summary route information in OSPFv3 process 1.
<Sysname> display ospfv3 1 abr-summary verbose
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 1.1.1.1
Total summary addresses: 1