HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

463
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
-------------------------------------------------------------------------
Ethernet1/1 is up, line protocol is up
Interface ID 3 Instance ID 0
IPv6 prefixes
fe80::200:12ff:fe34:1 (Link-Local address)
2001::1
Cost: 1 State: BDR Type: Broadcast MTU: 1500
Priority: 1
Designated router: 2.2.2.2
Backup designated router: 1.1.1.1
Timers: Hello 10, Dead 40, Wait 40, Retransmit 5, Transmit delay 1
Neighbor count is 1, Adjacent neighbor count is 1
IPsec profile name: profile001
Previous state: Waiting
Exchanging/Loading neighbors: 0
Wait timer: Off, LsAck timer: Off
Table 116 Command output
Field Descri
p
tion
Area Area ID that the interface belongs to.
Interface ID Interface ID.
Instance ID Instance ID.
IPv6 prefixes IPv6 Prefix.
Cost Cost value of the interface.
State
Interface state:
• DOWN—No protocol traffic can be sent or
received on the interface.
• Waiting—The interface starts sending and
receiving Hello packets and the router is trying to
determine the identity of the (Backup) designated
router for the network.
• p-2-p—The interface will send Hello packets at the
interval of HelloInterval, and try to establish an
adjacency with the neighbor.
• DR—The router is the designated router on the
network.
• BDR—The router is the backup designated router
on the network.
• DROther—The router is a DROther router on the
attached network.
Type
Network type of the interface: PTP (P2P), PTMP
(P2MP), broadcast, or NBMA.
MTU MTU value of the interface.