HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

469
OSPFv3 Process 1 with Router ID 1.1.1.1
Nexthop : FE80::20C:29FF:FED7:F308 Interface: Eth1/2
RefCount: 4 Status : Valid
NbrID : 1.1.1.1 NbrIntID : 21
Nexthop : FE80::20C:29FF:FED7:F312 Interface: Eth0/2
RefCount: 3 Status : Valid
NbrID : 1.1.1.1 NbrIntID : 38
Table 121 Command output
Field Descri
p
tion
Nexthop Next hop address.
Interface Output interface.
RefCount Reference count (routes that reference the next hop).
Status Next hop status: valid or invalid.
NbrId Neighbor router ID.
NbrIntID Neighbor interface ID.
display ospfv3 peer
Use display ospfv3 peer to display information about OSPFv3 neighbors.
Syntax
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ] [ verbose ] |
peer-router-id | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into an IPv4 address by the system.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed neighbor information.
peer-router-id: Specifies a neighbor.
statistics: Displays OSPFv3 neighbor statistics.