HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

470
Usage guidelines
If no process-id is specified, this command displays neighbor information for all processes.
If no area is specified, this command displays neighbor information for all areas.
If no interface or no neighbor is specified, this command displays neighbor information for all interfaces.
Examples
# Display the neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer ethernet 1/1
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID Pri State Dead-Time Interface Inst ID
2.2.2.2 1 Full/DR 00:00:33 Eth1/2 0
Table 122 Command output
Field Descri
p
tion
Router ID Router ID of a neighbor.
Pri Priority of neighbor router.
State Neighbor state.
Dead Time Dead time remained.
Interface Interface connected to the neighbor.
Inst ID Instance ID.
# Display detailed neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer ethernet 1/2 verbose
OSPFv3 Process 1 with Router ID 1.1.1.1
Area 0.0.0.1 interface Eth1/2's neighbors
Router ID: 2.2.2.2 Address: fe80::200:5eff:fe00:100
State: Full Mode: Nbr is master Priority: 1
DR: 2.2.2.2 BDR: None MTU: 1500
Options is 0x000013 (-|R|-|-|E|V6)
Dead timer due in 00:00:38
Neighbor is up for 00:19:07
Neighbor state change count: 120
Database Summary List 0
Link State Request List 0
Link State Retransmission List 3
Neighbor interface ID: 8037
Previous state: Loading
GR state: Normal
Grace period: 0 Grace period timer: Off
DD Rxmt timer: Off LS Rxmt timer: On