HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

475
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. Without this argument, the
command displays the OSPFv3 route information for all processes.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix.
The prefix-length argument specifies a prefix length in the range of 0 to 128.
Examples
# Display OSPFv3 routing information.
<Sysname> display ospfv3 routing
OSPFv3 Process 1 with Router ID 1.1.1.1
-------------------------------------------------------------------------
E1 - Type 1 external route, IA - Inter area route, I - Intra area route
E2 - Type 2 external route, * - Selected route
*Destination: 1001::/64
Type : I Cost : 1
Nexthop : Direct Interface: Eth1/2
AdvRouter : 2.2.2.2 Area : 0.0.0.0
Preference : 10
Total: 1
Intra area: 1 Inter area: 0 ASE: 0
Table 127 Command output
Field Descri
p
tion
Destination Destination network segment.
Type Route type.
Cost Route cost value.
Nexthop Next hop address.
Interface Output interface.
AdvRouter Advertising router.
Area Area ID.
Preference Route preference.
Total Total number of routes.
Intra Area Number of intra-area routes.
Inter Area Number of inter-area routes.