4000 Router Series Layer 3 - IP Routing Command Reference

482

Field Descri

tion

HELLO: Ebit option mismatch Hello packets with mismatched E-bit in the option field.

DD: Ebit option mismatch DD packets with mismatched E-bit in the option field.

DD: Unknown LSA type DD packets with unknown LSA type.

DD: MTU option mismatch DD packets with mismatched MTU.

REQ: Empty request LSR packets with no request information.

REQ: Bad request Bad LSR packets.

UPD: LSA checksum bad LSU packets with wrong LSA checksum.

UPD: Unknown LSA type LSU packets with unknown LSA type.

UPD: Less recent LSA LSU packets without latest LSA.

UPD: LSA length bad LSU packets with wrong LSA length.

UPD: LSA AdvRtr id bad LSU packets with wrong LSA advertising router.

ACK: Bad ack packet Bad LSAck packets for LSU packets.

ACK: Invalid ack Invalid LSAck packets.

Interface down Shutdown times of the interface.

Multicast incapable Failures to join the multicast group.

display ospfv3 vlink

Use display ospfv3 vlink to display OSPFv3 virtual link information.

Syntax

display ospfv3 [ process-id ] vlink

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. Without this argument, the

command displays the OSPFv3 virtual link information for all OSPFv3 processes.

Examples

# Display OSPFv3 virtual link information.

<Sysname> display ospfv3 vlink

OSPFv3 Process 1 with Router ID 1.1.1.1

Virtual-link Neighbor-id: 12.2.2.2, Neighbor-state: Full

Interface: 2348 (Vlan-interface12), Instance-ID: 0

Local IPv6 address: 3:3333::12