HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

483
Remote IPv6 address: 2:2222::12
Cost: 1 State: P-2-P Type: Virtual
Transit area: 0.0.0.1
Timers: Hello 10, Dead 40, Retransmit 5, Transmit Delay 1
IPsec profile name: profile001
Table 132 Command output
Field Descri
p
tion
Virtual-link Neighbor-ID ID of the neighbor on the virtual link.
Neighbor-State Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, or Full.
Interface IP address and name of the local interface on the virtual link.
Cost Interface route cost.
State Interface state.
Type Virtual link.
Transit Area
Transit area ID. (This field is displayed when a virtual link is present on the
interface.)
Timers
Values of OSPFv3 timers (in seconds): hello, dead, and retransmit, and
interface transmission delay.
IPsec profile name IPsec profile applied to the virtual link.
enable ipsec-profile
Use enable ipsec-profile to apply an IPsec profile to an OSPFv3 area.
Use undo enable ipsec-profile to remove the IPsec profile from the OSPFv3 area.
Syntax
enable ipsec-profile profile-name
undo enable ipsec-profile
Default
No IPsec profile is applied to an area.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IPsec profile by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
IPsec can protect packets from data eavesdropping, tampering, and attacks caused by forged packets.
For more information about IPsec profiles, see Security Configuration Guide.
Examples
# Apply IPsec profile profile001 to area 0 in OSPFv3 process 1.