HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

490
Related commands
ospfv3 timer dead
import-route (OSPFv3 view)
Use import-route to redistribute routes.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | route-policy
route-policy-name | type type ] *
undo import-route protocol [ process-id | all-processes ]
Default
OSPFv3 route redistribution is disabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be bgp4+, direct, isisv6,
ospfv3, ripng, or static.
process-id: Specifies the process ID of a routing protocol, in the range of 1 to 65536. It defaults to 1. This
argument takes effect only when the protocol is isisv6, ospfv3, or ripng.
all-processes: Redistributes routes from all the processes of the specified routing protocol. This keyword
takes effect only when the protocol is ripng, ospfv3, or isisv6.
allow-ibgp: Allows redistribution of IBGP routes. It is available only when the protocol is bgp4+.
cost value: Specifies a cost for redistributed routes, in the range of 1 to 16777214. The default is 1.
route-policy route-policy-name: Uses the specified routing policy to filter redistributed routes. The
route-policy-name argument is a case-sensitive string of 1 to 63 characters.
type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.
Usage guidelines
An external route is a route to a destination outside the OSPFv3 AS. External routes types are as follows:
• A Type-1 external route has high reliability. Its cost is comparable with the cost of OSPFv3 internal
routes. The cost from an OSPFv3 router to a Type-1 external route's destination equals the cost from
the router to the ASBR plus the cost from the ASBR to the external route's destination.
• A Type-2 external route has low credibility, so OSPFv3 considers the cost from the ASBR to a Type-2
external route is much bigger than the cost from the ASBR to an OSPFv3 internal router. The cost
from an internal router to a Type-2 external route's destination equals the cost from the ASBR to the
Type-2 external route's destination.
The import-route command cannot redistribute default routes.