HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

493
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Default
The maximum number of ECMP routes depends on the device model.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
maximum: Specifies the maximum number of ECMP routes, in the range of 1 to 8. When the maximum
number is 1, OSPFv3 does not perform load balancing.
Usage guidelines
The maximum number of ECMP routes configured by using this command cannot be greater than the
limit configured by using the max-ecmp-num command.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] maximum load-balancing 2
Related commands
max-ecmp-num
ospfv3
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
Syntax
ospfv3 [ process-id | vpn-instance vpn-instance-name ] *
undo ospfv3 [ process-id ]
Default
No OSPFv3 process is enabled.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. The default process ID is
1.