HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

520
Views
IS-IS view
Predefined user roles
network-admin
Examples
# Create IS-IS process 1, and enable IPv6 for the process.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
ipv6 filter-policy export
Use ipv6 filter-policy export to configure IPv6 IS-IS to filter redistributed routes.
Use undo ipv6 filter-policy export to remove the configuration.
Syntax
ipv6 filter-policy { acl6-number | prefix-list prefix-list-name | route-policy route-policy-name } export
[ protocol [ process-id ] ]
undo ipv6 filter-policy export [ protocol [ process-id ] ]
Default
IPv6 IS-IS does not filter redistributed routes.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999 to filter redistributed
routes.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters, to filter the redistributed routes.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters, to filter redistributed routes.
protocol: Filters routes redistributed from the specified routing protocol, which can be bgp4+, direct,
isisv6, ospfv3, ripng, or static. If no protocol is specified, the command filters routes redistributed from all
routing protocols.
process-id: Specifies a process by its ID in the range of 1 to 65535. This argument is available only when
the protocol is isisv6, ospfv3, or ripng.
Usage guidelines
This command filters routes redistributed by the ipv6 import-route command. Only routes that have not
been filtered can be redistributed.