HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

539
Usage guidelines
If no policy is specified, this command displays information about all policies. If a policy name is
specified, this command displays information about the specified policy.
Examples
# Display all IPv6 policy information.
<Sysname> display ipv6 policy-based-route
Policy name: aaa
node 1 permit:
if-match acl 2000
apply next-hop 1000::1
Table 138 Command output
Field Description
node 1 permit The match mode of Node 1 is permit.
if-match acl Matches IPv6 packets against IPv6 ACL.
apply next-hop Specify a next hop for permitted IPv6 packets.
Related commands
ipv6 policy-based-route (system view)
display ipv6 policy-based-route interface
Use display ipv6 policy-based-route interface to display IPv6 interface PBR configuration and statistics.
Syntax
MSR2000/MSR3000:
display ipv6 policy-based-route interface interface-type interface-number
MSR4000:
display ipv6 policy-based-route interface interface-type interface-number [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Displays the IPv6 PBR configuration and statistics on a card. The slot-number is the
number of the slot that holds the card.
Examples
# Display IPv6 PBR configuration and statistics on Ethernet 1/1.
<Sysname> display ipv6 policy-based-route interface ethernet 1/1
Policy based routing information for interface Ethernet1/1(failed):