HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

540
Policy name: aaa
node 0 deny:
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit:
if-match acl 2000
apply next-hop 1000::1
apply output-interface Ethernet1/2 track 1 (down)
apply output-interface Ethernet1/3 track 2 (inactive)
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matched: 0
Total matched: 0
<Sysname> display ipv6 policy-based-route interface ethernet 1/1
Policy based routing information for interface Ethernet1/1:
Policy name: aaa
node 0 deny(not support):
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit(no resource):
if-match acl 2000
apply next-hop 1000::1
apply output-interface Ethernet1/2 track 1 (down)
apply output-interface Ethernet1/3 track 2 (inactive)
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matched: 0 (no statistics resource)
Total matched: 0
Table 139 Command output
Field Description
Policy based routing information for
interface Ethernet1/1(failed)
IPv6 PBR configuration and statistics on Ethernet 1/1.
failed indicates the policy (including all its nodes) failed to be assigned
to the driver.
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 10), failed can be displayed only when you
specify the slot slot-number option for the command.