HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

541
Field Description
node 0 deny(not support)
node 2 permit(no resource)
Match mode of the node, permit or deny.
not support means the device does not support the match criteria
configured on the node. no resource means the device has insufficient
ACL resources, and failed to assign ACL resources to the node.
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 10), not support and no resource can be
displayed only when you specify the slot slot-number option for the
command.
if-match acl Matches IPv6 packets against the IPv6 ACL.
apply next-hop Specify a next hop for permitted IPv6 packets.
apply output-interface Ethernet1/2
track 1 (down)
Specify an output interface for permitted packets. The interface status
includes the following:
• up—The interface is up.
• down—The interface is down at network layer.
• inactive—The interface is not in position.
Matched: 0 (no statistics resource)
Number of successful matches on the node (no statistics resource
indicates insufficient statistics resources).
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 10), no statistics resource can be displayed
only when you specify the slot slot-number option for the command.
Total matched Total number of successful matches on all nodes.
Related commands
reset ipv6 policy-based-route statistics
display ipv6 policy-based-route local
Use display ipv6 policy-based-route local to display IPv6 local PBR configuration and statistics.
Syntax
MSR2000/MSR3000:
display ipv6 policy-based-route local
MSR4000:
display ipv6 policy-based-route local [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Displays the IPv6 PBR configuration and statistics on a card. The slot-number argument
is the number of the slot that holds the card.