4000 Router Series Layer 3 - IP Routing Command Reference

565

Use undo if-match interface to remove the configuration.

Syntax

if-match interface { interface-type interface-number }&<1-16>

undo if-match interface [ interface-type interface-number ]&<1-16>

Default

No match criterion is configured.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

&<1-16>: Indicates that the argument before it can be entered up to 16 times.

Usage guidelines

BGP does not support criteria for matching against the output interface of routing information.

Examples

# Configure node 10 in permit mode for routing policy policy1 to permit routes with the output interface

Ethernet 1/1.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy-policy1-10] if-match interface ethernet 1/1

if-match local-preference

Use if-match local-preference to match BGP routes having the specified local preference.

Use undo if-match local-preference to restore the default.

Syntax

if-match local-preference preference

undo if-match local-preference