HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

566
Examples
# Create node 10 in permit mode for routing policy policy1 to match BGP routes having a local
preference of 2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match preference 2
if-match mac-list
Use if-match mac-list to match EVI IS-IS routes whose destination MAC address matches the specified
MAC list.
Use undo if-match mac-list to remove the configuration.
Syntax
if-match mac-list mac-list-name
undo if-match mac-list mac-list-name
Default
No MAC list match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
mac-list-name: Specifies a MAC list by its name, a case-sensitive string of 1 to 63 characters.
Examples
# Configure node 10 of routing policy policy1 to match routes whose destination MAC address matches
MAC list p1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match mac-list p1
if-match mpls-label
Use if-match mpls-label to specify the MPLS label match criterion.
Use undo if-match mpls-label to restore the default.
Syntax
if-match mpls-label
undo if-match mpls-label
Default
No MPLS label match criterion is configured.