4000 Router Series Layer 3 - IP Routing Command Reference

568

[Sysname-route-policy-policy1-10] if-match route-type internal

if-match tag

Use if-match tag to match routing information having the specified tag.

Use undo if-match tag to restore the default.

Syntax

if-match tag value

undo if-match tag

Default

No tag match criterion is configured.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

value: Specifies a tag in the range of 0 to 4294967295.

Examples

# Configure node 10 in permit mode for routing policy policy1 to match RIP, OSPF, and IS-IS routing

information having a tag of 8.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy-policy1-10] if-match tag 8

if-match vlan

Use if-match vlan to match EVI IS-IS routes whose VLAN ID falls into the specified VLAN ID range.

Use undo if-match vlan to remove the configuration.

Syntax

if-match vlan { vlan-id1 [ to vlan-id2 ] }&<1-16>

undo if-match vlan [ vlan-id1 [ to vlan-id2 ] ]&<1-16>