HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

69
Views
User view
Predefined user roles
network-admin
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Usage guidelines
After executing the command, you are prompted to confirm the operation.
Examples
# Reset RIP process 100.
<Sysname> reset rip 100 process
Reset RIP process? [Y/N]:y
reset rip statistics
Use reset rip statistics to clear statistics for a RIP process.
Syntax
reset rip process-id statistics
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Examples
# Clear statistics for RIP process 100.
<Sysname> reset rip 100 statistics
rip
Use rip to enable RIP and enter RIP view.
Use undo rip to disable RIP.
Syntax
rip [ process-id ] [ vpn-instance vpn-instance-name ]
undo rip [ process-id ]
Default
RIP is disabled.