4000 Router Series Layer 3 - IP Routing Command Reference

Usage guidelines

An interface prefers the RIP version configured on it over the global RIP version. If no RIP version is

specified for the interface and the global version is RIPv1, the interface uses RIPv1, and it can send RIPv1

broadcasts, and receive RIPv1 broadcasts and unicasts. If no RIP version is specified for the interface and

the global version is RIPv2, the interface uses RIPv2 multicast mode, and it can send RIPv2 multicasts, and

receive RIPv2 broadcasts, multicasts, and unicasts.

Examples

# Specify the global RIP version as RIPv2.

<Sysname> system-view

[Sysname] rip 100

[Sysname-rip-100] version 2

Related commands

rip version