HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

131
Field Descri
p
tion
Protocol Protocol type and number.
Total entries found Total number of EIM entries.
Related commands
• nat mapping-behavior
• nat outbound
display nat inbound
Use display nat inbound to display information about inbound dynamic NAT.
Syntax
display nat inbound
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about inbound dynamic NAT.
<Sysname> display nat inbound
NAT inbound information:
There are 1 NAT inbound rules.
Interface: GigabitEthernet1/2
ACL: 2038 Address group: 2 Add route: Y
NO-PAT: N Reversible: N
VPN instance: vpn1
Table 30 Command output
Field Descri
p
tion
NAT inbound information Information about inbound dynamic NAT.
Interface Interface where inbound dynamic NAT is configured.
ACL
ACL number. If no ACL is used for the inbound dynamic NAT rule, this field
displays hyphens (---).
Address group
NAT address group used by inbound dynamic NAT rule. If no NAT address
group is used, the field displays hyphens (---).
Add route
Whether to add a route when a packet matches the inbound dynamic NAT
rule.
NO-PAT
Whether NO-PAT or PAT is used:
• Y—NO-PAT is used.
• N—PAT is used.