HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

132
Field Descri
p
tion
Reversible Whether reverse address translation is allowed.
VPN instance
MPLS L3VPN instance to which the NAT address group belongs. If the
group does not belong to any VPN, the field is not displayed.
Related commands
nat inbound
display nat log
Use display nat log to display NAT logging configuration.
Syntax
display nat log
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display NAT logging configuration.
<Sysname> display nat log
NAT logging:
Log enable : Enabled(ACL 2000)
Flow-begin : Disabled
Flow-end : Disabled
Flow-active: Enabled(10 minutes)
Table 31 Command output
Field Descri
p
tion
NAT logging NAT logging configuration.
Log enable
Whether NAT logging is enabled.
If an ACL is specified for NAT logging, this field displays the ACL number.
Flow-begin Whether logging is enabled for NAT session establishment events.
Flow-end Whether logging is enabled for NAT session removal events.
Flow-active
Whether logging is enabled for active NAT flows. If it is, this field also
displays the interval in seconds at which active flow logging is generated.
Related commands
• nat log enable
• nat log flow-active
• nat log flow-begin