HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

135
Predefined user roles
network-admin
network-operator
Examples
# Display information about outbound dynamic NAT.
<Sysname> display nat outbound
NAT outbound information:
There are 2 NAT outbound rules.
Interface: GigabitEthernet1/1
ACL: 2036 Address group: 1 Port-preserved: Y
NO-PAT: N Reversible: N
Interface: GigabitEthernet1/1
ACL: 2037 Address group: --- Port-preserved: N
NO-PAT: Y Reversible: Y
VPN instance: vpn_nat
Table 33 Command output
Field Descri
p
tion
NAT outbound information Information about outbound dynamic NAT.
Interface Interface where outbound dynamic NAT is configured.
ACL
ACL number. If no ACL is specified for outbound dynamic NAT, this field
displays hyphens (---).
Address group
Address group used by inbound dynamic NAT. If no address group is
specified for address translation, the field displays hyphens (---).
Port-preserved Whether to try to preserve the port numbers for PAT.
NO-PAT
Whether NO-PAT is used:
• Y—NO-PAT is used.
• N—PAT is used.
Reversible Whether reverse address translation is allowed.
VPN instance
MPLS L3VPN instance to which the NAT address group belongs. If the
group does not belong to any VPN instance, the field is not displayed.
Related commands
nat outbound
display nat server
Use display nat server to display NAT Server configuration.
Syntax
display nat server