HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

140
Protocol: TCP(6)
Responder:
Source IP/port: 192.168.1.55/22
Destination IP/port: 192.168.1.18/1877
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: TCP(6)
State: TCP_SYN_SENT
Application: SSH
Start time: 2011-07-29 19:12:36 TTL: 28s
Interface(in) : Ethernet0/1
Interface(out): Ethernet0/2
Initiator->Responder: 1 packets 48 bytes
Responder->Initiator: 0 packets 0 bytes
Total sessions found: 1
Table 36 Command output
Field Descri
p
tion
Initiator Session information about an initiator.
Responder Session information about a responder.
Protocol Transport layer protocol type, DCCP, ICMP, Raw IP, SCTP, TCP, UDP, or UDP-Lite.
VPN instance/VLAN
ID/VLL ID
MPLS L3VPN instance to which the session belongs.
VLAN ID to which the session belongs for Layer 2 forwarding.
INLINE to which the session belongs for Layer 2 forwarding.
If a setting is not specified, this field displays a hyphen (-).
State NAT session status.
Application
Application layer protocol type: FTP or DNS.
This field displays unknown for the protocol type of non-well-known ports.
Start time Time when the session starts.
TTL NAT session lifetime in seconds.
Interface(in) Input interface.
Interface(out) Output interface.
Initiator->Responder Number of packets and packet bytes from the initiator to the responder.
Responder->Initiator Number of packets and packet bytes from the responder to the initiator.
Total sessions found Total number of session tables.
Related commands
reset nat session
display nat static
Use display nat static to display static NAT mappings.