HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

142
Interfaces enabled with static NAT:
There are 2 interfaces enabled with static NAT.
Interface: GigabitEthernet1/2
GigabitEthernet1/3
Table 37 Command output
Field Descri
p
tion
Net-to-net Net-to-net static NAT mapping.
IP-to-IP One-to-one static NAT mapping.
Local IP Internal IP address or address pool.
Global IP External IP address or address pool.
Netmask Network mask.
Local VPN
MPLS L3VPN instance to which the internal IP address belongs.
If no VPN instance is specified, this field is not displayed.
Global VPN
MPLS L3VPN instance to which the external IP address belongs.
If no VPN instance is specified, this field is not displayed.
ACL
ACL number.
If no ACL is used, this field displays hyphens (---).
Reversible Whether reverse address translation is allowed.
Related commands
• nat static
• nat static net-to-net
• nat static enable
display nat statistics
Use display nat statistics to display NAT statistics.
Syntax
MSR2000/MSR3000:
display nat statistics
MSR4000:
display nat statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator