HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

143
Parameters
slot slot-number: Specifies the slot number of a card. If no slot number is specified, this command displays
NAT statistics for all cards. (MSR4000)
Examples
# Display all NAT statistics.
<Sysname> display nat statistics
Total session entries: 100
Total EIM entries: 1
Total inbound NO-PAT entries: 0
Total outbound NO-PAT entries: 0
Table 38 Command output
Field Descri
p
tion
Total session entries Number of NAT session entries.
Total EIM entries Number of EIM entries.
Total inbound NO-PAT entries Number of inbound NO-PAT entries.
Total outbound NO-PAT entries Number of outbound NO-PAT entries.
inside ip
Use inside ip to add a member to an internal server group.
Use undo inside ip to remove a member from an internal server group.
Syntax
inside ip inside-ip port port-number [ weight weight-value ]
undo inside ip inside-ip port port-number
Default
An internal server group does not contain any member.
Views
Internal server group view
Predefined user roles
network-admin
Parameters
inside-ip: Specifies the IP address of an internal server.
port port-number: Specifies the port number of an internal server, in the range of 1 to 65535, excluding
FTP port 20.
weight weight-value: Specifies the weight of the internal server. The value range is 1 to 1000, and the
default value is 100. An internal server with a larger weight receives a larger percentage of connections
in the internal server group.
Examples
# Add a member with IP address 10.1.1.2 and port number 30 to internal server group 1.