HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

144
<Sysname> system-view
[Sysname] nat server-group 1
[Sysname-nat-server-group-1] inside ip 10.1.1.2 port 30
Related commands
nat server-group
nat address-group
Use nat address-group to create a NAT address group and enter its view.
Use undo nat address-group to remove a NAT address group.
Syntax
nat address-group group-number
undo nat address-group group-number
Default
No NAT address group exists.
Views
System view
Predefined user roles
network-admin
Parameters
group-number: Assigns a number to the NAT address group, in the range of 0 to 65535.
Usage guidelines
A NAT address group consists of multiple group members and each group member specifies an address
pool configured with the address command.
Examples
# Create a NAT address group numbered 1.
<Sysname> system-view
[Sysname] nat address-group 1
Related commands
• address
• display nat address-group
• display nat all
• nat inbound
• nat outbound
nat alg
Use nat alg to enable NAT with ALG for the specified or all supported protocols.
Use undo nat alg to disable NAT with ALG for the specified or all protocols.