HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

150
Related commands
• display nat all
• display nat log
• nat log flow-active
• nat log flow-begin
nat log flow-active
Use nat log flow-active to log active NAT flows and set the logging interval.
Use undo nat log flow-active to disable the logging function for active NAT flows.
Syntax
nat log flow-active time-value
undo nat log flow-active
Default
Logging for active NAT flows is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
time-value: Specifies the interval for logging active NAT flows, in the range of 10 to 120 minutes.
Usage guidelines
This function helps track active NAT flows.
Logging for active flows takes effect only after you enable NAT logging.
Examples
# Enable logging for active NAT flows and set the logging interval to 10 minutes.
<Sysname> system-view
[Sysname] nat log flow-active 10
Related commands
• display nat all
• display nat log
• nat log enable
nat log flow-begin
Use nat log flow-begin to enable logging for NAT session establishment events. When a NAT session is
established, this command outputs a NAT log.
Use undo nat log flow-begin to disable logging for NAT session establishment events.