4000 Router Series Layer 3 - IP Services Command Reference

176

# Display the IPv4 adjacency entries on the card in slot 1.

<Sysname> display adjacent-table slot 1

IP address Routing interface Physical interface Type Slot

0.0.0.0 Pos1/0 Pos1/0 PPP 1

# Display the number of IPv4 adjacency entries on the card in slot 1.

<Sysname> display adjacent-table slot 1 count

Total entries on slot 1 : 1

Table 43 Command output

Field Description

IP address

IP address of the next hop.

• For a P2P link, the IP address of the next hop is not needed. This field

displays 0.0.0.0.

• For an NBMA link, the value 0.0.0.0 indicates the default adjacency

entry. Packets are forwarded through the default virtual circuit.

Routing interface Output interface of the matching route entry.

Physical interface Physical interface of which the outgoing packets are sent out.

Logical interface

Logical interface for sending the packets. If the entry has no logical interface,

this field displays N/A.

Service type/Type Link layer protocol type, such as PPP, HDLC, Tunnel, and MTunnel.

Action type Packet processing type, Forwarding or Drop.

Link media type

Link media type:

• P2P—Point-to-point link.

• NBMA—Non-broadcast multi-access link.

Slot ID of the slot that holds the card.

Virtual circuit information

Information about the virtual circuit, such as PVC or DLCI. If the entry has no

virtual circuit, this field displays N/A.

Link head information(IP) Link layer header for IPv4.

Link head information(MPLS) Link layer header for MPLS.