4000 Router Series Layer 3 - IP Services Command Reference

178

# Display the IPv6 adjacency entries on the card in slot 1.

<Sysname> display ipv6 adjacent-table slot 1

IPv6 address Routing interface Physical interface Type Slot

N/A Pos1/0 Pos1/0 PPP 1

# Display the total number of IPv6 adjacency entries on the card in slot 1.

<Sysname> display ipv6 adjacent-table slot 1 count

Total entries on slot 1: 1

Table 44 Command output

Field Description

IPv6 address

IPv6 address of the next hop.

• For a P2P link, the IPv6 address of the next hop is not needed. This field

has the value 0::0, and displays N/A.

• For an NBMA link, the value 0.0.0.0 indicates a default adjacency table.

Packets are forwarded through the default virtual circuit.

Routing interface Output interface of the matching route entry.

Physical interface Physical interface of which the outgoing packets are sent out.

Logical interface

Logical interface that sends the packets. If the entry has no logical interface,

this field displays N/A.

Service type/Type Link layer protocol type, such as PPP, HDLC, Tunnel, and MTunnel.

Action type Packet processing type, Forwarding or Drop.

Link media type

Link media type:

• P2P—Point-to-point link.

• NBMA—Non-broadcast multi-access link.

Slot ID of the slot that holds the card.

Virtual circuit information

Information about the virtual circuit, such as PVC or DLCI. If the entry has no

virtual circuit, this field displays N/A.

Link head information(IPv6) Link layer header for IPv6.