HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

184
Usage guidelines
Use the display rawip verbose command to display detailed information about socket creator, state,
option, type, protocol number, and the source and destination IP addresses of RawIP connections.
Examples
# Display detailed information about RawIP connections. (MSR4000)
<Sysname> display rawip verbose
Total RawIP socket number: 1
Slot: 6
Creator: ping[320]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/state): 0 / 9216 / 1 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 3
Protocol: 1
Connection info: src = 0.0.0.0, dst = 0.0.0.0
Inpcb flags: N/A
Inpcb vflag: INP_IPV4
TTL: 255(minimum TTL: 0)
Send VRF: 0xffff
Receive VRF: 0xffff
Table 48 Command output
Field Description
Total RawIP socket number Total number of RawIP sockets.
Slot Number of the slot that holds the card.
Creator
Name of the operation that created the socket. The number in brackets
is the process number of the creator.
State State of the socket.
Options Socket options.
Error Error code.
Receiving buffer
(cc/hiwat/lowat/state)
Information about the receiving buffer: in brackets are the used space,
the maximum space, the minimum space, and the state.
Sending buffer
(cc/hiwat/lowat/state)
Information about the sending buffer: in brackets are the used space,
the maximum space, the minimum space, and the state.
Type Socket type.
Protocol Number of the protocol using the socket.
Connection info Source IP address and destination IP address.
Inpcb flags Flags in the Internet PCB.
Inpcb vflag IP version flags in the Internet PCB.
TTL TTL value in the Internet PCB.