HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

216
Examples
# Display IPv6 prefix information for VLAN-interface 10.
<Sysname> display ipv6 interface Vlan-interface10 prefix
Prefix: 1001::/65 Origin: ADDRESS
Age: - Flag: AL
Lifetime(Valid/Preferred): 2592000/604800
Prefix: 2001::/64 Origin: STATIC
Age: - Flag: L
Lifetime(Valid/Preferred): 3000/2000
Prefix: 3001::/64 Origin: RA
Age: 600 Flag: A
Lifetime(Valid/Preferred): -
Table 58 Command output
Filed Descri
p
tion
Prefix IPv6 address prefix.
Origin
How the prefix is generated:
• STATIC—Manually configured with the ipv6 nd ra prefix command.
• RA—Advertised in RA messages after stateless autoconfiguration is enabled.
• ADDRESS—Generated by a manually configured address.
Age Aging time in seconds. If the prefix does not age out, this field displays a hyphen (-).
Flag
Flags advertised in RA messages. If no flags are available, this field displays a hyphen (-).
• L—The address with the prefix is directly reachable on the link.
• A—The prefix is used for stateless autoconfiguration.
Lifetime
Lifetime in seconds advertised in RA messages. If the prefix does not need to be
advertised, this field displays a hyphen (-).
• Valid—Valid lifetime of the prefix.
• Preferred—Preferred lifetime of the prefix.
Related commands
ipv6 nd ra prefix
display ipv6 neighbors
Use display ipv6 neighbors to display IPv6 neighbor information.
Syntax
MSR2000/MSR3000:
display ipv6 neighbors { ipv6-address | all | dynamic | interface interface-type interface-number |
static | vlan vlan-id } [ verbose ]
MSR4000:
display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ verbose ]