HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

217
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Specifies the IPv6 address of a neighbor whose information is displayed.
all: Displays information about all neighbors, including neighbors acquired dynamically and configured
statically on the public network and all private networks.
dynamic: Displays information about all neighbors acquired dynamically.
static: Displays information about all neighbors configured statically.
slot slot-number: Displays neighbor information for the specified card. The slot-number argument
specifies the slot that holds the card. (MSR4000)
interface interface-type interface-number: Displays neighbor information for the interface. The
interface-type interface-number argument specifies an interface by its type and number.
vlan vlan-id: Displays information about neighbors in the specified VLAN. The value range for VLAN ID
is 1 to 4094.
verbose: Displays detailed neighbor information.
Usage guidelines
You can use the reset ipv6 neighbors command to clear specific IPv6 neighbor information.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
Type: S-Static D-Dynamic I-Invalid
IPv6 Address Link Layer VID Interface State T Age
FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A Eth1/1 REACH D 10
# Display detailed information about all neighbors.
<Sysname> display ipv6 neighbors all verbose
Type: S-Static D-Dynamic I-Invalid
IPv6 Address: FE80::200:5EFF:FE32:B800
Link layer : 0000-5e32-b800 VID : N/A Interface: Eth1/1
State : REACH Type: IS Age : -
Vpn-instance: vpn1
Table 59 Command output
Field Descri
p
tion
IPv6 Address IPv6 address of a neighbor.
Link Layer Link layer address (MAC address) of a neighbor.
VID VLAN to which the interface connected with a neighbor belongs.
Interface Interface connected with a neighbor.