HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

269
Field Descri
p
tion
Preference value
Server preference in the DHCPv6 Advertise message. The value ranges
from 0 to 255. The bigger the value is, the higher preference the server
has.
Allow-hint Indicates whether desired address/prefix assignment is enabled.
Rapid-commit Indicates whether rapid address/prefix assignment is enabled.
display ipv6 dhcp server conflict
Use display ipv6 dhcp server conflict to display information about IPv6 address conflicts.
Syntax
display ipv6 dhcp server conflict [ address ipv6-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays conflict information for the specified IPv6 address. If no IPv6 address is
specified, this command displays information about all IPv6 address conflicts.
Usage guidelines
The DHCPv6 server creates IP address conflict information in the following conditions:
• The DHCPv6 client sends a DECLINE packet to the DHCPv6 server to inform the server of an IPv6
address conflict.
• The DHCPv6 server discovers that the only assignable address in the address pool is its own IPv6
address.
Examples
# Display information about all address conflicts.
<Sysname> display ipv6 dhcp server conflict
IPv6 address Detect time
2001::1 Apr 25 16:57:20 2007
1::1:2 Apr 25 17:00:10 2007
Table 71 Command output
Field Description
IPv6 address Conflicted IPv6 address.
Detect time Time when the conflict was discovered.
Related commands
reset ipv6 dhcp server conflict