HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

291
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] static-bind prefix 2001:0410::/35 duid 00030001CA0006A400 iaid
A1A1A1A1
Related commands
display ipv6 dhcp pool
temporary address range
Use temporary address range to configure a temporary IPv6 address range in a DHCPv6 address pool
for dynamic allocation.
Use undo temporary address range to remove the temporary IPv6 address range from the address pool.
Syntax
temporary address range start-ipv6-address end-ipv6-address [ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
undo temporary address range
Default
No temporary IPv6 address range is configured in an address pool.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
start-ipv6-address: Specifies the start IPv6 address.
end-ipv6-address: Specifies the end IPv6 address.
preferred-lifetime preferred-lifetime: Specifies the preferred lifetime. The value ranges from 60 to
4294967295 seconds and defaults to 604800 seconds (7 days).
valid-lifetime valid-lifetime: Specifies the valid lifetime. The value ranges from 60 to 4294967295
seconds, and defaults to 2592000 seconds (30 days). The valid lifetime cannot be shorter than the
preferred lifetime.
Usage guidelines
If you do not execute the temporary address range command, the DHCPv6 server does not support
temporary address assignment.
You can configure only one temporary IPv6 address range in an address pool. If you use the command
multiple times, the most recent configuration takes effect.
Examples
# In DHCPv6 address pool 1, configure a temporary IPv6 address range from 3ffe:501:ffff:100::50 to
3ffe:501:ffff:100::60.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] network 3ffe:501:ffff:100::/64