HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

297
network-operator
Parameters
address ipv6-address: Displays the DHCPv6 snooping entry for the specified IPv6 address.
vlan vlan-id: Specifies the ID of the VLAN where the IPv6 address resides.
Usage guidelines
If you do not specify any parameters, the command displays all DHCPv6 snooping entries.
Examples
# Display all DHCPv6 snooping entries.
<Sysname> display ipv6 dhcp snooping binding
1 DHCPv6 snooping entries found.
IPv6 address MAC address Lease VLAN SVLAN Interface
================ ============== =========== ==== ===== ========================
2::1 00e0-fc00-0006 54 2 N/A Ethernet1/1
Table 78 Command output
Field Descri
p
tion
IPv6 Address IPv6 address assigned to the DHCPv6 client.
MAC Address MAC address of the DHCPv6 client.
Lease Remaining lease duration in seconds.
VLAN
When both DHCPv6 snooping and QinQ are enabled or the DHCPv6
packet contains two VLAN tags, this field identifies the outer VLAN tag.
Otherwise, it identifies the VLAN where the port connecting the DHCPv6
client resides.
SVLAN
When both DHCPv6 snooping and QinQ are enabled or the DHCPv6
packet contains two VLAN tags, this field identifies the inner VLAN tag.
Otherwise, it displays N/A.
Interface Port connecting to the DHCPv6 client.
Related commands
• ipv6 dhcp snooping binding record
• reset ipv6 dhcp snooping binding
display ipv6 dhcp snooping binding database
Use display ipv6 dhcp snooping binding database to display information about the file that stores
DHCPv6 snooping entries.
Syntax
display ipv6 dhcp snooping binding database
Views
Any view
Predefined user roles
network-admin