HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

301
Views
System view
Predefined user roles
network-admin
Parameters
seconds: Sets the waiting period in seconds, in the range of 60 to 864000.
Usage guidelines
When a DHCPv6 snooping entry is learned or removed, the device updates the database file when the
waiting period is reached. All changed entries during that period will be updated.
If no file has been specified, this command does not take effect.
Examples
# Set the device to wait 600 seconds (10 minutes) to update the database file.
<Sysname> system-view
[Sysname] ipv6 dhcp snooping binding database update interval 600
Related commands
ipv6 dhcp snooping binding database filename
ipv6 dhcp snooping binding database update now
Use ipv6 dhcp snooping binding database update now to manually save DHCPv6 snooping entries to
the database file.
Syntax
ipv6 dhcp snooping binding database update now
Views
System view
Predefined user roles
network-admin
Usage guidelines
Use this command to manually save DHCPv6 snooping entries to the database file. Use the ipv6 dhcp
snooping binding database filename command to specify the file before the manual saving operation.
Otherwise, the saving operation does not take effect.
Examples
# Save DHCPv6 snooping entries to the database file.
<Sysname> system-view
[Sysname] ipv6 dhcp snooping binding database update now
Related commands
ipv6 dhcp snooping binding database filename