HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

313
Syntax
ipv6 fast-forwarding aging-time aging-time
undo ipv6 fast-forwarding aging-time
Default
The aging time of IPv6 fast forwarding entries is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
aging-time: Sets the aging time for IPv6 fast forwarding entries, in the range of 10 to 300 seconds.
Examples
# Set the aging time for IPv6 fast forwarding entries to 20 seconds.
<Sysname> system-view
[Sysname] ipv6 fast-forwarding aging-time 20
Related commands
display ipv6 fast-forwarding aging-time
reset ipv6 fast-forwarding cache
Use reset ipv6 fast-forwarding cache to clear IPv6 fast forwarding table information.
Syntax
MSR2000/MSR3000:
reset ipv6 fast-forwarding cache
MSR4000:
reset ipv6 fast-forwarding cache [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by the slot number. If you do not specify this option, this command
clears the IPv6 fast forwarding table information for all cards. (MSR4000)
Examples
# Clear IPv6 fast forwarding table information.
<Sysname> reset ipv6 fast-forwarding cache
Related commands
• display ipv6 fast-forwarding cache